Remember to Have the Furnace Inspected at the Sign of an Issue

 

Having the furnace inspected is recommended and one of the most important things you can do. It can help you to notice a sign of an issue before it turns into a problem that is much worse. Noticing an issue at the first sign can help you to save time, money, and stress in the long run. It will also help decrease the chance of an unexpected breakdown when you least expect it.

Having the furnace inspected also helps to locate any issues such as a carbon monoxide leak. When the heat exchanger in your furnace becomes cracked, gases like carbon monoxide can escape into your home. Carbon monoxide is colorless, odorless, and potentially deadly. For your family’s safety, it’s important to inspect your furnace regularly to prevent carbon monoxide poisoning. It’s also wise to install a carbon monoxide detector outside of each bedroom to protect and alert family members. If you are not sure about a detector, make sure to ask us, and we can advise you how many to purchase and where to place them.

Also, the inspection can help inspect the furnace’s internal parts wear out over time, which could cause it to stop working. We can inspect the furnace and replace any parts that may have worn are increasing their chance of failing. If you notice an issue with the furnace, make sure to contact us as soon as possible so we can inspect and repair it for you. This can help you to have a warm and comfortable home this winter for you and your family.

Furnace Efficiency is Important

Furnace efficiency is something that everyone should be aware of. In order to improve the efficiency of your furnace now, taking a few simple steps will help reduce the chance of an unexpected breakdown later. Make sure to contact us so we can come and inspect the furnace and system for you. If you have a forced-air system, then you can improve its performance by making sure the filter in the furnace isn’t clogged. How often you need to change the filter will depend on your individual home and system. Check it every month or two until you have a sense of the right routine. We can also advise you on what the schedule should be for your heating system.

Another way to improve the furnace efficiency is to have a programmable thermostat. This is beneficial because you can program the heat to come on when you actually need it, you will not waste money heating an empty house. There are some thermostats that you can control remotely through your smart phone or computer. A thermostat only turns a heater on or off. Contrary to popular belief, turning the temperature way up will not make the house heat up any faster.

Ceiling fans can also improve the efficiency of your furnace. To distribute heat throughout the room, find the small switch on the main body of the fan that reverses the fan’s direction. When you do not feel a breeze, that means the fan is blowing air upward, circulating air without cooling the room. Hot air that is trapped at the ceiling will be forced down along the walls.

Remember to visual check the ductwork in your home. You can increase the efficiency of the system by sealing all the joints to permanently keep the ducts from leaking hot air. If you are not sure if the ductwork has a leak in it, we can inspect it for you. Noticing an issue at the first sign can help you to save time, money, and stress in the long run. By having the system regularly inspected by us, the furnace efficiency can increase for your home.

Improve the Air in Your Home with a Clean Filter

 

It is important to have the best quality in your home. This will help the overall health and breathing of you and your family. Many people seem to assume that air pollution is a problem that only happens outside. Oftentimes the indoor air quality can actually be worse than outdoor air quality due to improper ventilation.

 

 

One factor that impacts the quality of indoor air is the cleanliness of the ductwork through which it must pass. Duct cleaning is not something most people do as a normal part of their regular household chores. If you want to help your health, make sure to periodically have the ductwork cleaned professionally.

Additionally, some houseplants can help improve indoor air quality. Any plants will help by giving off oxygen, but some plants do far more by also absorbing high levels of pollutants. Aloe Vera is one of the top five household plants for cleaning the air. Since it is a desert plant, it requires relatively little water or other attention, making it an excellent choice for anyone whose primary goal in purchasing a plant is to clean the air.

 

Make sure inspect the filter regularly. Filters are designed to capture dust and other pollutants that might be in the air of your home. Overtime, the filters will become clogged with this. If you are not sure how often to clean or replace your filter, make sure to contact us, and we can advise you of the correct schedule. This can help to keep the air in your home the best it can be.

 

Maintaining the Filter for your Furnace

 

When the furnace heats up, another control turns on the blower fan, which circulates warm air throughout the house. In the case of a hot-water system, a pump circulates hot water into radiators located throughout the house.

 

It is best to have us conduct inspections and adjustments on your furnace. This way we can ensure the parts and components are working efficiently with one another. When we inspect the HVAC system, we can check the furnace, thermostat, ductwork, and filter.

 

The best place to start on your furnace is with the filter. A dirty filter will cause excessive strain on your furnace, increase heating costs and reduce the life of your equipment. Make sure that the furnace filter has a cover over the slot, ensuring an efficient return-air system. Not having a cover poses a safety issue.

 

Also remember to never operate the furnace without a filter in. This can cause dirt and dust to get into the moving parts of the HVAC system, and causing further damage. It will also allow the dirt and dust to circulate back through the air in your home. If you or your family members suffer from allergies or asthma, having clean air in your home is important.

 

If you ever notice anything out of the norm with the HVAC system, make sure to contact us. This way we can inspect the furnace system for you, and keep it operating as efficiently as possible for you.

 

Reasons why you should Not Ignore Furnace Maintenance

 

Keeping your home warm and comfortable is important. To accomplish this, you should make sure that your HVAC system is inspected on a regular basis.
If you are not taking proper care of your furnace, the air filter becomes damaged and will produce poor and sometimes harmful air in your home. Because furnaces can clog, and clog quickly, dust, debris, and noxious mold can accumulate and cause serious harm to the air. If your filter cannot keep unwanted particles out any longer, the furnace and duct will have these airborne particles building up and infecting your home. When you ignore your heating and cooling systems for too long, there will be much worse consequences than just dust particles in the air. Over time, system neglect will make your home susceptible to carbon monoxide poisoning. This poison is both odorless and colorless, so it’s extremely difficult to identify and can pose a serious and potentially deadly threat in your home.
No one wants to live in an uncomfortable home, but that’s unavoidable once your furnace dies. If you notice anything out of the norm with the HVAC system, make sure to contact us. This can help to prevent any further issues with the unit. It can also reduce the chance of a costly repair bill in the long run. If you are not sure how often the filters should be inspected or changed, we can also advise you on a schedule for them. This will help to capture the dirt and dust in the air of your home, keeping the air quality the best that it can be.

If the HVAC system is starting to wear out, you will be money ahead by purchasing a new one. This will reduce the amount of frequent repairs that would otherwise be needed on your old system. If you are not sure what system would be beneficial for your home, make sure to contact us and we can advise you on the correct unit.

The Difference between a Furnace, Heater, and Boiler

 

In the middle of this frigid winter, you may wonder what device is causing your living room to maintain that comfortable 72 degree temperature. Most homes are equipped with a central heating system, though the parts that make up that heating system can be a bit confusing.

Heaters

 

A heater is really just a catch-all term for a device that heats up an environment. Central heating units tend to have a location for the heating device, be it in a machine room or attic or basement, where the heat is created and distributed throughout the building. These are quite common in most houses, apartment complexes, and commercial buildings.

A central heating system uses some form of energy combustion or release, be it from a furnace or furnace and boiler combination. Essentially, a furnace or boiler is the mechanism that produces the heat that your central heating system will then distribute to keep your home warm.

Furnaces

The first furnaces were stone or clay structures that used coal and/or wood to create intense heat. These furnaces were primarily used for ceramic work, such as with kilns, and smelting ore to create metal objects, tools, and materials. They are still the primary appliance in industrial metal production.

Modern day home furnaces tend to run off gas or electricity or induction (a reaction of electricity and metal to create heat). They are much safer and contained than their older counterparts, are the cornerstone for most modern central heating units, producing high amounts of heat that feed into a ventilation system and flow throughout all of the connected rooms.

Small furnaces, usually electrical, are often attached to boilers and water heaters to apply the necessary energy in order to give us hot showers and scalding sink faucets, or even to circulate heat from the boiler to heat our home.

Boilers

Often a smaller gas or electrical furnace is attached to the boiler, heats the water, and once the water has hit its boiling point, the heat is distributed through a series of pipes and ducts that make up your central heating system. This process is also applied to your water heater providing the warm water you need for washing clothes and dishes. Using a boiler can eliminate the need to have a separate traditional central heating system and hot water heater, and are highly efficient due to the fact that the steam is in a closed loop that recycles steam back into water to be boiled again.

Maintaining the Furnace Filters

 

The furnace and heating system is an important part of your home. Sometimes the filter is forgot about until a much larger issue forms. The other parts and components of the heating system should also be inspected. This includes the ductwork and thermostat. If the ductwork is clogged, air will not be able to get through as efficiently. If there are cracks or punctures in the ductwork, it could cause the heat to be lost. This will make the furnace work harder and longer than it should. With lost heat, it can end up costing you more money each month on heating bills. If you notice that the actual temperature is different than the set temperature, there could be an issue with the thermostat. Checking for issues early on can help to notice any signs of an issue. By catching an issue early on, you can help to prevent a much larger one from forming. It can also help to reduce the chance of a costly repair bill when it is fixed.

 

 

The filter is an important part of the furnace. Without a filter, the life of the furnace will be significantly reduced. It will cause parts to becoming worn out sooner than they should. This is because the dirt and debris will cover the interior of the heating system. It will also result in poor quality air being distributed throughout your home from the ductwork. The filter is designed to capture and trap any dirt, debris, or pollutants that are in the air. This helps to prevent these harmful contaminants from going through the heating system. It is recommended to never run the furnace without a filter in it.

 

 

Since the filter captures the pollutants and dirt that are in the air, it is important to inspect the filter on a regular basis. The filter of the heating system should be kept as clean as possible. When inspecting the filter, make sure to clean it off as best you can. Also check when it is recommended to change the filter. Over time, the filter will become so clogged that it will not be able to allow the air through efficiently. When this happens, a replacement of a new filter will be needed. If you are unsure how often the filter should be changed, we can help to recommend a schedule for you.

 

 

By investing in a good quality filter and inspecting it regularly, you can help to improve the quality of air in your home. The filter will capture the dirt and pollutants to avoid them going through the ductwork. This will also prevent the debris from being blown out through the registers and vents in the home. You can also contact us and we can advise you when the filter should be inspected and changed.

The Filter for your Furnace

 

 

The filter is an important part of the furnace. Without a filter, the life of the furnace will be significantly reduced. It will cause parts to becoming worn out sooner than they should. This is because the dirt and debris will cover the interior of the heating system. It will also result in poor quality air being distributed throughout your home from the ductwork. The filter is designed to capture and trap any dirt, debris, or pollutants that are in the air. This helps to prevent these harmful contaminants from going through the heating system. It is recommended to never run the furnace without a filter in it.

 

Since the filter captures the pollutants and dirt that are in the air, it is important to inspect the filter on a regular basis. The filter of the heating system should be kept as clean as possible. When inspecting the filter, make sure to clean it off as best you can. Also check when it is recommended to change the filter. Over time, the filter will become so clogged that it will not be able to allow the air through efficiently. When this happens, a replacement of a new filter will be needed. If you are unsure how often the filter should be changed, we can help to recommend a schedule for you.

 

By investing in a good quality filter and inspecting it regularly, you can help to improve the quality of air in your home. The filter will capture the dirt and pollutants to avoid them going through the ductwork. This will also prevent the debris from being blown out through the registers and vents in the home. If you suffer from allergies or asthma, make sure to inspect and change the filter regularly. Having the filter replaced regularly can improve the air quality in your home, as well as making it more enjoyable to be in.

Noticing Noises from your Furnace

 

Are the loud noises coming from your furnace keeping you up at night? Furnaces often start to make strange noises when a malfunction is occurring. If you notice anything out of the norm with your furnace and HVAC system, make sure to contact us.

Repeated clicking noises often indicate that there is a problem with your furnace’s ignition system. Your furnace’s spark igniter is trying to ignite your pilot light but is failing to do so resulting in your furnace not starting. To check whether or not your furnace problems are caused by an ignition switch malfunction you will want to figure out if your furnace has a pilot light or electric ignition and light the pilot to observe the ignition process to make sure it is functioning normally.

Banging, popping and rattling noises often indicate there is a problem with the blower assembly, motor or furnace burners. Rattling can mean a component in the system is coming loose. It’s important to repair that component before it breaks or disconnects completely.

If you hear extremely loud banging sounds shut the heating system off, something most likely has broken and disconnected. If you hear a banging noise when the furnace turns on followed by no hot air, dirty furnace burners may be to blame. Dirty furnace burners let gas accumulate in the furnace before the gas ignites. The delayed ignition from the gas buildup is what causes the loud bang. It is important not to ignore this noise. Doing so can crack your furnace’s heat exchanger, which oftentimes results in the need for a new furnace.

If you are hearing a loud noise when your furnace turns on but are not sure if it is coming from your furnace it could be caused by expanding and contracting air ducts. When your furnace blower starts it sucks in air and blows it out through supply ducts. This causes different parts of your ducts to contract and expand. A minor popping noise is natural, but when there is a loud pop or bang there could be a more serious problem caused by undersized ducts, closed vents or a clogged air filter.

Anytime you notice anything out of the norm with the heater or furnace, make sure to contact us. We can inspect the system to ensure everything is working efficiently and effectively. By fixing an issue at the first sign, you can help save time, money, and stress in the long run.

Reasons Why the Furnace may not Operate Correctly

 

Keeping your furnace working efficiently in the winter is beneficial for the warmth and comfort in your home. The best thing to do is to contact us so we can inspect the furnace and HVAC system for you.

Ensure that your thermostat is set higher than the temperature in your home.  Otherwise your electric heater or gas furnace will not turn on.  If there is an issue with the thermostat, you can tell by if the actual temperature is different than the set temperature in your home.

Another possible culprit for your heater blowing cold air is the batteries in your thermostat.  Some thermostats are connected to central power and some have central power with a battery backup, but what some people don’t realize is that there are some thermostats that work on batteries only, so check your thermostat and replace your batteries accordingly.  This can cause your heater to blow cold air due to improper temperature inputs from the thermostat.

A heater blowing cold air could be a result of a leak in your ducting.  Over time, the changing temperatures wear on all sorts of things and your ductwork is no exception.  Your ducts are usually in the attic and outside of your insulation, exposing them to the bitter cold. If your heater is blowing warm air but that air is venting into the attic or mixing with colder air from your attic, then the net result will be that your heater is blowing cold air.

Another possible problem is the accumulation of dirt and debris inside of ductwork, which can slow down airflow.  This problem is rarely severe enough to fully block airflow, but it is worth looking into.  If airflow is blocked too much, it can cause your heater to overheat which can cause it to kick off as a safety precaution.  No matter what issue you have, make sure to contact us so we can inspect the furnace for you